Extraction of Magnesium

Extraction of Magnesium

Extraction of Magnesium

Magnesium Atomic Number: 12
Magnesium Electronic configuration: [Ne]3s2

Magnesium is highly electropositive and strong reducing agent. Therefore it is extracted by electrolysis of their fused metal halides containing alkali metal halides. The function of alkali metal halides is

  1. To lower the operating temperature.

  2. To increase the electrical conductivity.
  1. From Magnesite: (MgCO3)
    The magnesite ore is calcinated into magnesium oxide.

    MgCO3  MgO + CO2

    Magnesium from magnesium oxide is obtained either by thermal reduction or electrolytic reduction. The magnesium oxide is dissolved in a mixture of molten fluorides of magnesium, bairum and sodium. The electrolysis is done by using carbon rods as anodes suspended in molten mass and cast iron rods as cathodes at 650oC. The magnesium is obtained in molten state.

  2. By Electrolysis of anhydrous magnesium chloride:

    Step 1
    : Preparation of anhydrous MgCl2

    1. From carnallite: (KCl.MgCl2.6H2O)
      Carnallite can not be dehydrated by heating alone. Because the water of crystallization reacts chemically with magnesium chloride to form oxychloride and finally to magnesium oxide.

      MgCl2.6H2O MgCl2.2H2O Mg2OCl2 MgO

      So, carnallite is heated in a current of HCL gas and air.

      MgCl2.6H2O    MgCl2 + 6H2O

    2. From MgO:
      Chlorine is passed over red hot mixture of MgO and carbon.

      MgO + C + Cl2    MgCl2 + CO

    3. From Dow's process: Sea water containing magnesium compound is treated with calcium hydroxide when magnesium hydroxide get precipitated. It is dissolved in dil. HCL. The solution on concentration gives hydrated magnesium chloride, which is hydrated as



Electrolysis of MgCl2

Anhydrous magnesium chloride is fused with NaCl and anhydrous calcium chloride in the ratio of 35% (MgCl2); 50% (NaCl) and 15% (CaCl2) to lower the fusion temperature and to increase the conductivity. The mixture is electrolysed at 700oC in presence of an inert gas to protect it from reaction of N2, O2 and CO2 present in air.

Magnesium is discharged at cathode. Magnesium being lighter than the fused mass floats on the surface from where it is removed periodically.

No ratings yet - be the first to rate this.

Add a comment

You're using an AdBlock like software. Disable it to allow submit.

Make a free website with emyspot.com - Report abuse